|
|
|
National Stock Number:
5305-01-155-9775
Federal Supply Class:
5305
National Item Identification Number:
011559775
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| FF-S-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS24693-B47 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS24693B47 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | HEAD DIAMETER | 0.285 INCHES MINIMUM AND 0.332 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 3C STYLE | | SCREW MATERIAL | COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 230 OR COPPER ALLOY 377 OR COPPER ALLOY 360 OR COPPER ALLOY 353 OR COPPER ALLOY 270 OR COPPER ALLOY 274 OR COPPER ALLOY 462 OR COPPER ALLOY 464 OR COPPER ALLOY 482 OR COPPER ALLOY 485 OR COPPER ALLOY 210 OR COPPER ALLOY 510 OR COPPER ALLOY 745 OR COPPER ALLOY 752 OR COPPER ALLOY 757 OR COPPER ALLOY 764 OR COPPER ALLOY 770 OR COPPER ALLOY 240 OR COPPER ALLOY 342 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.159 INCHES MINIMUM AND 0.252 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNC |
|
|