5305-01-163-5779, SCREW,CAP,HEXAGON HEAD

National Stock Number:
5305-01-163-5779

Federal Supply Class:
5305

National Item Identification Number:
011635779

Description:
SCREW,CAP,HEXAGON HEAD

Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.

Manufacturer Information:

FF-S-85	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS51109-96	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

THREAD SERIES DESIGNATOR	UNC
THREAD LENGTH	1.124 INCHES MINIMUM AND
	1.267 INCHES MAXIMUM
FASTENER LENGTH	3.406 INCHES MINIMUM AND
	3.500 INCHES MAXIMUM
MATERIAL	STEEL COMP 410 OR
	STEEL COMP 416 OR
	STEEL COMP 430 OVERALL
HEAD STYLE	HEXAGON
THREAD DIRECTION	RIGHT-HAND
NOMINAL THREAD DIAMETER	0.437 INCHES
THREAD QUANTITY PER INCH	14
THREAD CLASS	2A
MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD ALL MATERIAL RESPONSES OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING	235.0 BRINELL STANDARD MAXIMUM OVERALL
MINIMUM TENSILE STRENGTH	70000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH	40000 POUNDS PER SQUARE INCH
HEAD HEIGHT	0.272 INCHES MINIMUM AND
	0.291 INCHES MAXIMUM
WIDTH BETWEEN FLATS	0.612 INCHES MINIMUM AND
	0.625 INCHES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	3.240 INCHES MINIMUM AND
	3.354 INCHES MAXIMUM FIRST HOLE
SHANK UNTHREADED HOLE DIAMETER	0.105 INCHES MINIMUM AND
	0.113 INCHES MAXIMUM FIRST HOLE
NONDEFINITIVE SPEC/STD DATA	2 TYPE AND
	10P STYLE
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	81348
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	FF-S-85
MANUFACTURERS CODE	96906
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	MS51109-96

Click here to Register for Free 30-day Trial