5305-01-169-9616, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-169-9616

Federal Supply Class:
5305

National Item Identification Number:
011699616

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

SS5112-653	16258	SPACE-LOK, INC.
SS5112-653	73197	HI-SHEAR CORPORATION
SS5112-653	78286	SIKORSKY AIRCRAFT CORPORATION
SS5112-653	84256	AVIBANK MFG., INC.
SS5112-653	L4528	LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	3.723 INCHES MINIMUM AND 3.743 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	3.851 INCHES MINIMUM AND 3.871 INCHES MAXIMUM
GRIP DIAMETER	0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM
GRIP LENGTH	3.312 INCHES MINIMUM AND 3.328 INCHES MAXIMUM
HEAD HEIGHT	0.189 INCHES MINIMUM AND 0.204 INCHES MAXIMUM
HEAD STYLE	CROWNED HEXAGON
INTERNAL DRIVE STYLE	SLOT
LOCKING FEATURE	DETENT BALL GRIP
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL	STEEL COMP 631 OR STEEL COMP 302 SPRING
MATERIAL	STEEL COMP 632 FASTENER
MINIMUM TENSILE STRENGTH	63000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.375 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS	0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.352 INCHES MINIMUM AND 0.403 INCHES MAXIMUM
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial