5305-01-171-8666, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-171-8666

Federal Supply Class:
5305

National Item Identification Number:
011718666

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

5005902

82577

RAYTHEON COMPANY

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER	0.524 INCHES MINIMUM AND 0.537 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.465 INCHES MINIMUM AND 0.475 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FOURTH DIAMETER	0.574 INCHES MINIMUM AND 0.587 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	0.494 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	4
FASTENER LENGTH	0.980 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.160 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
FOURTH DIAMETER FROM HEAD	0.124 INCHES MINIMUM AND 0.132 INCHES MAXIMUM
HEAD HEIGHT	0.165 INCHES NOMINAL
HEAD STYLE	HEXAGON
INTERNAL DRIVE STYLE	W/O INTERNAL DRIVE
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A276,TYPE S21800 COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL CORROSION RESISTING OVERALL
MINIMUM TENSILE STRENGTH	95000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.164 INCHES
POINT STYLE	CONE
SECOND DIAMETER FROM HEAD	0.127 INCHES MINIMUM AND 0.129 INCHES MAXIMUM
WIDTH BETWEEN FLATS	0.312 INCHES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THIRD DIAMETER FROM HEAD	0.160 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	2A
THREAD LENGTH	0.399 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNC
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial