5305-01-173-1061, SCREW,EXTERNALLY RELIEVED BODY

5905-01-173-1058 RESISTOR NETWORK,FIXED,FILM

National Stock Number:
5305-01-173-1061

Federal Supply Class:
5305

National Item Identification Number:
011731061

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

0N509278	98230	NATIONAL SECURITY AGENCY
FF-S-92	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.190 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	3
FASTENER LENGTH	0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.085 INCHES MINIMUM AND 0.089 INCHES MAXIMUM
HEAD DIAMETER	0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT	0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE	PAN
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
MINIMUM TENSILE STRENGTH	80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.112 INCHES
NONDEFINITIVE SPEC/STD DATA	3 TYPE AND 9C STYLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.185 INCHES NOMINAL
THREAD CLASS	2A
THREAD SERIES DESIGNATOR	UNC
THREAD QUANTITY PER INCH	40

Click here to Register for Free 30-day Trial