|
|
|
National Stock Number:
5305-01-182-1623
Federal Supply Class:
5305
National Item Identification Number:
011821623
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 10-33000-02 | 09691 | L3HARRIS MAS INC | | 5305PL0783954 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.112 INCHES | | THREAD QUANTITY PER INCH | 40 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.112 INCHES NOMINAL | | FASTENER LENGTH | 0.342 INCHES NOMINAL | | MATERIAL | STEEL COMP 303SE OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | PAN NO. 2 | | HEAD DIAMETER | 0.205 INCHES MINIMUM AND | | 0.210 INCHES MAXIMUM | | HEAD HEIGHT | 0.063 INCHES NOMINAL | | INTERNAL DRIVE STYLE | SLOT | | POINT STYLE | FLAT | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.074 INCHES MINIMUM AND | | 0.077 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.230 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 09691 | | DESIGN CONTROL REFERENCE | 10-33000-02 |
|
|