|
|
|
National Stock Number:
5305-01-186-3087
Federal Supply Class:
5305
National Item Identification Number:
011863087
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| MS3369B615 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.351 INCHES MINIMUM AND | | 0.402 INCHES MAXIMUM | | FASTENER LENGTH | 1.476 INCHES MINIMUM AND | | 1.496 INCHES MAXIMUM | | MATERIAL | STEEL COMP XM-13 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 63000 POUNDS PER SQUARE INCH | | HEAD STYLE | CROWNED HEXAGON | | HEAD HEIGHT | 0.189 INCHES MINIMUM AND | | 0.204 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND | | 0.564 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | LOCKING FEATURE | DETENT BALL GRIP | | GRIP LENGTH | 0.938 INCHES MINIMUM AND | | 0.954 INCHES MAXIMUM | | GRIP DIAMETER | 0.3737 INCHES MINIMUM AND | | 0.3742 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | 32.0 MICROINCHES GRIP | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.349 INCHES MINIMUM AND | | 1.369 INCHES MAXIMUM FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND | | 0.116 INCHES MAXIMUM FIRST HOLE | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS3369B615 |
|
|