|
|
|
National Stock Number:
5305-01-186-3089
Federal Supply Class:
5305
National Item Identification Number:
011863089
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| MS3369B817 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS3369B817 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.500 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.396 INCHES MINIMUM AND | | 0.447 INCHES MAXIMUM | | FASTENER LENGTH | 1.708 INCHES MINIMUM AND | | 1.728 INCHES MAXIMUM | | MATERIAL | STEEL COMP XM-13 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 63000 POUNDS PER SQUARE INCH | | HEAD STYLE | CROWNED HEXAGON | | HEAD HEIGHT | 0.251 INCHES MINIMUM AND | | 0.266 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.741 INCHES MINIMUM AND | | 0.752 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | LOCKING FEATURE | DETENT BALL GRIP | | GRIP LENGTH | 1.062 INCHES MINIMUM AND | | 1.078 INCHES MAXIMUM | | GRIP DIAMETER | 0.4986 INCHES MINIMUM AND | | 0.4991 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | 32.0 MICROINCHES GRIP | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.575 INCHES MINIMUM AND | | 1.595 INCHES MAXIMUM FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND | | 0.116 INCHES MAXIMUM FIRST HOLE |
|
|