|
|
|
National Stock Number:
5305-01-187-5839
Federal Supply Class:
5305
National Item Identification Number:
011875839
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| CA21017-3-14 | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | FIT01-0001-3014 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | LE111-0001-3014 | 43999 | THE BOEING COMPANY | | LE111-0001-3014 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. |
|
Techincal Specification:
| FASTENER LENGTH | 1.310 INCHES MINIMUM AND 1.330 INCHES MAXIMUM | | GRIP LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM | | GRIP DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | HEAD DIAMETER | 0.360 INCHES MINIMUM AND 0.374 INCHES MAXIMUM | | HEAD HEIGHT | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 | | INTERNAL DRIVE STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SPECIAL FEATURES | 3 KEYWAYS 1.280 IN. MIN. AND 1.300 IN. MAX. LONG AND 0.030 IN. MIN. AND 0.034 IN. MAX. WIDE MACHINED IN SHANK. BORE MACHINED IN THREAD END TO RECEIVE PLUG | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.425 INCHES MINIMUM AND 0.465 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNJF | | WIDTH ACROSS FLATS | 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM |
|
|