|
|
|
National Stock Number:
5305-01-190-2176
Federal Supply Class:
5305
National Item Identification Number:
011902176
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 0098-LL-TJ2-2805 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 5190687 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.580 INCHES MINIMUM AND | | 0.600 INCHES MAXIMUM | | FASTENER LENGTH | 1.420 INCHES MINIMUM AND | | 1.440 INCHES MAXIMUM | | MATERIAL | STEEL COMP 1013 OR | | STEEL COMP 1015 OR | | STEEL COMP 1016 OR | | STEEL COMP 1017 OR | | STEEL COMP 1018 OR | | STEEL COMP 1019 OR | | STEEL COMP 1020 OR | | STEEL COMP 1021 OR | | STEEL COMP 1022 OR | | STEEL COMP 1023 OR | | STEEL COMP 1524 OR | | STEEL COMP 1025 OR | | STEEL COMP 1026 OR | | STEEL COMP 1527 OR | | STEEL COMP 1029 OR | | STEEL COMP 1030 OR | | STEEL COMP 1033 OR | | STEEL COMP 1034 OR | | STEEL COMP 1035 OR | | STEEL COMP 1536 OR | | STEEL COMP 1037 OR | | STEEL COMP 1038 OR | | STEEL COMP 1039 OR | | STEEL COMP 1040 OR | | STEEL COMP 1541 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND | | 38.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 120000 POUNDS PER SQUARE INCH | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.226 INCHES MINIMUM AND | | 0.243 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.551 INCHES MINIMUM AND | | 0.562 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | W/O INTERNAL DRIVE | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.260 INCHES MINIMUM AND | | 0.270 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.820 INCHES MINIMUM AND | | 0.860 INCHES MAXIMUM |
|
|