| THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD DIAMETER | 0.112 INCHES |
| THREAD QUANTITY PER INCH | 40 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.230 INCHES MINIMUM AND |
| 0.312 INCHES MAXIMUM |
| FASTENER LENGTH | 0.280 INCHES MINIMUM AND |
| 0.312 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES SECONDARY WASHER |
| QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE FASTENER |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND |
| 53.0 ROCKWELL C MAXIMUM SECONDARY WASHER |
| MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH |
| HEAD STYLE | PAN |
| HEAD DIAMETER | 0.205 INCHES MINIMUM AND |
| 0.219 INCHES MAXIMUM |
| HEAD HEIGHT | 0.078 INCHES MINIMUM AND |
| 0.080 INCHES MAXIMUM |
| INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| WASHER QUANTITY | 2 |
| PRIMARY WASHER STYLE | SPLIT HELICAL RING |
| PRIMARY WASHER OUTSIDE DIAMETER | 0.172 INCHES NOMINAL |
| PRIMARY WASHER MATERIAL THICKNESS | 0.025 INCHES NOMINAL |
| SECONDARY WASHER RELATIONSHIP TO PRIMARY WASHER | NOT IDENTICAL |
| SECONDARY WASHER STYLE | FLAT |
| SECONDARY WASHER OUTSIDE DIAMETER | 0.213 INCHES MINIMUM AND |
| 0.223 INCHES MAXIMUM |
| SECONDARY WASHER MATERIAL THICKNESS | 0.013 INCHES MINIMUM AND |
| 0.019 INCHES MAXIMUM |
| SPECIFICATION/STANDARD DATA | 80205-NAS1301 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |