5305-01-191-2465, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-191-2465

Federal Supply Class:
5305

National Item Identification Number:
011912465

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

AS292-5-11	84256	AVIBANK MFG., INC.
GB510CG5-11	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.063 INCHES MINIMUM AND 1.079 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	1.166 INCHES MINIMUM AND 1.186 INCHES MAXIMUM
GRIP LENGTH	0.688 INCHES MINIMUM AND 0.704 INCHES MAXIMUM
GRIP DIAMETER	0.3112 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM
HARDNESS RATING	43.0 ROCKWELL C MINIMUM AND 47.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.577 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
LOCKING FEATURE	DETENT BALL THREADS
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
MATERIAL	STEEL COMP XM-13 OVERALL
MINIMUM TENSILE STRENGTH	63000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPECIAL FEATURES	INTERNAL DRIVE RIBBED
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.462 INCHES MINIMUM AND 0.498 INCHES MAXIMUM
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial