5305-01-193-7613, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-193-7613

Federal Supply Class:
5305

National Item Identification Number:
011937613

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

AS292-6-11	84256	AVIBANK MFG., INC.
GB510CG611	06725	SPS TECHNOLOGIES, LLC
GB510CG611	06950	HOWMET GLOBAL FASTENING SYSTEMS INC
GB510CG611	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
GB510CG611	27614	JENKINS METAL CORP
GB510CG611	50539	VARIAN DATA MACHINES CUSTOMER SERVICE
GB510CG611	58845	ABOUNDING SECURITY INC DIV OF MAA CORP
GB510CG611	73197	HI-SHEAR CORPORATION
GB510CG611	92215	HOWMET GLOBAL FASTENING SYSTEMS INC
GB510CG611	L4528	LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC

Techincal Specification:

COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.099 INCHES MINIMUM AND 1.119 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	1.227 INCHES MINIMUM AND 1.247 INCHES MAXIMUM
GRIP LENGTH	0.688 INCHES MINIMUM AND 0.704 INCHES MAXIMUM
GRIP DIAMETER	0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM
HARDNESS RATING	43.0 ROCKWELL C MINIMUM AND 47.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.704 INCHES MINIMUM AND 0.762 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
LOCKING FEATURE	DETENT BALL GRIP
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP XM-13 OVERALL
MINIMUM TENSILE STRENGTH	63000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.375 INCHES
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
SHANK UNTHREADED HOLE DIAMETER	0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A
THREAD LENGTH	0.352 INCHES MINIMUM AND 0.403 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	24

Click here to Register for Free 30-day Trial