|
|
|
National Stock Number:
5305-01-193-9714
Federal Supply Class:
5305
National Item Identification Number:
011939714
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 720285-38 | 05869 | RAYTHEON COMPANY | | CS900406-6-3 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | FRS7500-6-B-5 | 0HDW7 | HUCK INTERNATIONAL, INC. | | FT1058-6-2-5 | 58794 | FASTENER TECHNOLOGY CORP | | CS9004S-06-6-3 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | FRS7500-6-B-5 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| FASTENER LENGTH | 0.765 INCHES NOMINAL | | HEAD DIAMETER | 0.356 INCHES NOMINAL | | HEAD HEIGHT | 0.385 INCHES NOMINAL | | HEAD STYLE | KNURLED NO. 1 | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL ACCOMMODATED THICKNESS | 0.032 INCHES MINIMUM AND 0.093 INCHES MAXIMUM | | MATERIAL | STEEL COMP 302 FASTENER OR STEEL COMP 304 FASTENER OR STEEL COMP 305 FASTENER OR STEEL COMP 316 FASTENER OR STEEL COMP 321 FASTENER OR STEEL COMP 347 FASTENER OR STEEL COMP 384 FASTENER OR STEEL COMP 385 FASTENER | | MATERIAL | STEEL COMP 303 STAND-OFF OR STEEL COMP 303 PLUS X STAND-OFF OR STEEL COMP 303CU STAND-OFF OR STEEL COMP 303MA STAND-OFF OR STEEL COMP 303PB STAND-OFF OR STEEL COMP 303SE STAND-OFF OR STEEL COMP 304 STAND-OFF OR STEEL COMP 304L STAND-OFF OR STEEL COMP 347 STAND-OFF OR STEEL COMP 348 STAND-OFF | | MATERIAL | STEEL COMP 302 PRIMARY WASHER | | MATERIAL | STEEL COMP 302 SECONDARY WASHER | | MATERIAL | STEEL COMP 302 SPRING | | PROPRIETARY CHARACTERISTICS | PACS | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNC |
|
|