|
|
|
National Stock Number:
5305-01-197-3508
Federal Supply Class:
5305
National Item Identification Number:
011973508
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 123179V3R10D | 80539 | SPS TECHNOLOGIES, LLC | | LE111-0041 REV D | 06725 | SPS TECHNOLOGIES, LLC | | SC1786RV3-10D | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | PBF1383-6310 | 27624 | SPS TECHNOLOGIES LLC | | LE111-0041-6310 | 43999 | THE BOEING COMPANY | | LE111-0041 REV D | 57928 | SONIC INDUSTRIES, INC. | | T181-6310 | 17446 | HUCK INTERNATIONAL, INC | | T181-6310 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.822 INCHES MINIMUM AND 0.862 INCHES MAXIMUM FIRST HOLE | | FASTENER LENGTH | 0.948 INCHES MINIMUM AND 0.978 INCHES MAXIMUM | | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | GRIP LENGTH | 0.625 INCHES NOMINAL | | HEAD DIAMETER | 0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM | | HEAD STYLE | OVAL COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | TITANIUM ALLOY OVERALL | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE | | SPECIAL FEATURES | DRY FILM LUBRICANT,INTERNAL DRIVE RIBBED | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.338 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|