5305-01-197-5935, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-197-5935

Federal Supply Class:
5305

National Item Identification Number:
011975935

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

MS21130B306	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS21130B306	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.658 INCHES MINIMUM AND 0.678 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	0.747 INCHES MINIMUM AND 0.767 INCHES MAXIMUM
GRIP DIAMETER	0.1889 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM
GRIP LENGTH	0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
HARDNESS RATING	43.0 ROCKWELL C MINIMUM AND 47.0 ROCKWELL C MAXIMUM FASTENER
HEAD DIAMETER	0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	HIGH-TORQUE
LOCKING FEATURE	DETENT BALL GRIP
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MINIMUM TENSILE STRENGTH	63000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
SHANK UNTHREADED HOLE DIAMETER	0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A
THREAD LENGTH	0.263 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial