|
|
|
National Stock Number:
5305-01-206-2156
Federal Supply Class:
5305
National Item Identification Number:
012062156
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 13200530-01 | 27963 | GENERAL DYNAMICS INFORMATION SYSTEMS INC. DBA GENERAL DYNAMICS ADVANCED INFORMATION SYSTEMS | | 13200530-01 | 3CYA2 | GENERAL DYNAMICS MISSION SYSTEMS, INC. | | 6161-SS-2528 | 06540 | NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV | | 6161-SS-2528 | 1YGB8 | CAREY MANUFACTURING CO, INC | | 5265828-018 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 1603317 | 56232 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.360 INCHES MINIMUM AND | | 0.400 INCHES MAXIMUM | | FASTENER LENGTH | 1.230 INCHES MINIMUM AND | | 1.270 INCHES MAXIMUM | | MATERIAL | STEEL COMP 303 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | KNURLED NO. 1 | | HEAD DIAMETER | 0.745 INCHES MINIMUM AND | | 0.755 INCHES MAXIMUM | | HEAD HEIGHT | 0.230 INCHES MINIMUM AND | | 0.270 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | POINT STYLE | CONE | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.170 INCHES MINIMUM AND | | 0.180 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.965 INCHES MINIMUM AND | | 0.975 INCHES MAXIMUM |
|
|