5305-01-209-7205, SCREW ASSEMBLY,PANEL

National Stock Number:
5305-01-209-7205

Federal Supply Class:
5305

National Item Identification Number:
012097205

Description:
SCREW ASSEMBLY,PANEL

Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.

Manufacturer Information:

F7500P-10-B-3	0HDW7	HUCK INTERNATIONAL, INC.
F7500P-10-B-3	97928	HUCK INTL INC
F7500P10B3	17446	HUCK INTERNATIONAL, INC
F7500P10B3	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH

Techincal Specification:

FASTENER LENGTH	0.482 INCHES MINIMUM AND 0.512 INCHES MAXIMUM
HEAD DIAMETER	0.451 INCHES NOMINAL
HEAD HEIGHT	0.290 INCHES NOMINAL
HEAD STYLE	KNURLED NO. 2
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL ACCOMMODATED THICKNESS	0.032 INCHES MINIMUM AND 0.093 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE HEAD
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE SPRING
MATERIAL	ALUMINUM ALLOY 6061 HEAD
MATERIAL	IRON ALLOY 660 FASTENER
MATERIAL	STEEL COMP 302 SPRING
MATERIAL	STEEL COMP 301 PRIMARY WASHER
NOMINAL THREAD DIAMETER	0.190 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625 TYPE 1 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
SURFACE TREATMENT	ANODIZE HEAD
SURFACE TREATMENT	PASSIVATE FASTENER
SURFACE TREATMENT	PASSIVATE PRIMARY WASHER
SURFACE TREATMENT	PASSIVATE SPRING
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNF

Click here to Register for Free 30-day Trial