|
|
|
National Stock Number:
5305-01-215-6738
Federal Supply Class:
5305
National Item Identification Number:
012156738
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 13234977-3 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 720285-91 | 05869 | RAYTHEON COMPANY | | FRS7500-10-B-4 | 0HDW7 | HUCK INTERNATIONAL, INC. | | FT1058-2-4 | 58794 | FASTENER TECHNOLOGY CORP | | CS9004S-3-5-3 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | FRS7500-10-B-4 | 97928 | HUCK INTL INC | | FTT7062-10-2-4DL | 58794 | FASTENER TECHNOLOGY CORP |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.610 INCHES MINIMUM AND | | 0.712 INCHES MAXIMUM | | FASTENER LENGTH | 1.192 INCHES MINIMUM AND | | 1.232 INCHES MAXIMUM | | MATERIAL | STEEL COMP 302 SECONDARY WASHER | | STEEL COMP 302 PRIMARY WASHER | | STEEL COMP 302 SPRING | | STEEL COMP 304 OR | | STEEL COMP 304L OR | | STEEL COMP 347 OR | | STEEL COMP 348 STAND-OFF | | STEEL COMP 302 OR | | STEEL COMP 305 OR | | STEEL COMP 316 OR | | STEEL COMP 384 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER | | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER | | QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE SPRING | | ASTMA493 ASSN STD ALL MATERIAL RESPONSES FASTENER | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | FLAT CHAMFER | | HEAD DIAMETER | 0.451 INCHES NOMINAL | | HEAD HEIGHT | 0.520 INCHES NOMINAL | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL ACCOMMODATED THICKNESS | 0.032 INCHES MINIMUM AND | | 0.093 INCHES MAXIMUM | | SPECIAL FEATURES | HEAD KNURLED |
|
|