5305-01-223-7124, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-223-7124

Federal Supply Class:
5305

National Item Identification Number:
012237124

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

923AS159 PC 28	30003	NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER
NAS11527E7	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NAS1152E7	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH	0.699 INCHES MINIMUM AND 0.729 INCHES MAXIMUM
GRIP DIAMETER	0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM
GRIP LENGTH	0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HEAD DIAMETER	0.280 INCHES MINIMUM AND 0.337 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	IRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.164 INCHES
SPECIFICATION/STANDARD DATA	80205-NAS1152 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD LENGTH	0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNJC

Click here to Register for Free 30-day Trial