5305-01-227-4602, SCREW,EXTERNALLY RELIEVED BODY

5905-01-227-4601 RESISTOR,VARIABLE,WIRE WOUND,PRE

National Stock Number:
5305-01-227-4602

Federal Supply Class:
5305

National Item Identification Number:
012274602

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

MS3498-7	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS3498-7	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.310 INCHES MINIMUM AND 0.320 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.535 INCHES MINIMUM AND 0.555 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.084 INCHES MINIMUM AND 0.089 INCHES MAXIMUM
HEAD DIAMETER	0.255 INCHES MINIMUM AND 0.285 INCHES MAXIMUM
HEAD HEIGHT	0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE	PAN NO. 2
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	5640 TYPE I ASSN STD ALL MATERIAL RESPONSES OR AISI T-303 ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIAL	STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER	0.138 INCHES
SPECIFICATION/STANDARD DATA	96906-MS3498-7 GOVERNMENT STANDARD
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.225 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)

Click here to Register for Free 30-day Trial