| DEPARTURE FROM CITED DOCUMENT | FF-S-86,PARAGRAPH 3.5.2,DRILLED HEAD |
| FASTENER LENGTH | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD DIAMETER | 0.550 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| HEAD HEIGHT | 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| HOLE CONFIGURATION STYLE | ROUND INTERNAL HEXAGON |
| HOLE DIAMETER | 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| HOLE QUANTITY | 6 |
| HOLE TYPE | DRILLED |
| INTERNAL DRIVE STYLE | HEXAGON |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A574 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL UNS K03104 OVERALL |
| MINIMUM TENSILE STRENGTH | 13200 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.375 INCHES |
| NONDEFINITIVE SPEC/STD DATA | 6 TYPE AND 3/8-16UNRC SIZE |
| SPECIFICATION/STANDARD DATA | 81348-FF-S-86 GOVERNMENT SPECIFICATION |
| WIDTH ACROSS FLATS | 0.312 INCHES MINIMUM AND 0.316 INCHES MAXIMUM |
| SUPPLEMENTARY FEATURES | MEETS ANSI B18.3,TABLES 1 AND 1A EXCEPT DRILLED HEAD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633,TYPE 2,CLASS 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CHROMATE ZINC OVERALL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD LENGTH | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNRC |
| THREAD QUANTITY PER INCH | 16 |