|
|
|
National Stock Number:
5305-01-235-2002
Federal Supply Class:
5305
National Item Identification Number:
012352002
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 142-9817-001 | 97871 | RAYTHEON COMPANY | | 6108-SS-0440-7 | 06540 | NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV | | 6108-SS-0440-7 | 1YGB8 | CAREY MANUFACTURING CO, INC | | 704AS11283 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.112 INCHES | | THREAD QUANTITY PER INCH | 40 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.115 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | FASTENER LENGTH | 0.859 INCHES MINIMUM AND | | 0.891 INCHES MAXIMUM | | MATERIAL | STEEL COMP 203EZ OR | | STEEL COMP 303 OR | | STEEL COMP 303 PLUS X OR | | STEEL COMP 303CU OR | | STEEL COMP 303MA OR | | STEEL COMP 303SE OR | | STEEL COMP 416 OR | | STEEL COMP 416 PLUS X OR | | STEEL COMP 416SE OR | | STEEL COMP 430F OR | | STEEL COMP 430FSE OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-W-52263 MIL SPEC ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | KNURLED NO. 1 | | HEAD DIAMETER | 0.307 INCHES MINIMUM AND | | 0.317 INCHES MAXIMUM | | HEAD HEIGHT | 0.296 INCHES MINIMUM AND | | 0.328 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | POINT STYLE | CONE | | POINT LENGTH | 0.078 INCHES NOMINAL | | POINT DIAMETER | 0.062 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | POINT CHAMFER ANGLE | 85.0 DEGREES MINIMUM AND | | 95.0 DEGREES MAXIMUM | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.073 INCHES MINIMUM AND | | 0.083 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.672 INCHES NOMINAL |
|
|