5305-01-264-5896, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-264-5896

Federal Supply Class:
5305

National Item Identification Number:
012645896

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

NAS7204L5

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

COLOR	GREEN THREADS
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH	0.722 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
GRIP LENGTH	0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
HEAD DIAMETER	0.456 INCHES MINIMUM AND 0.508 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
LOCKING FEATURE	PATCH OR PELLET OR STRIP THREADS
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-F-18240 MIL SPEC SINGLE MATERIAL RESPONSE LOCKING FEATURE
MATERIAL	IRON ALLOY 660 FASTENER
MATERIAL	PLASTIC LOCKING FEATURE
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
SPECIFICATION/STANDARD DATA	80205-NAS7204 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE FINISH	63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT	CADMIUM AND CHROMATE FASTENER
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	28

Click here to Register for Free 30-day Trial