|
|
|
National Stock Number:
5305-01-272-8978
Federal Supply Class:
5305
National Item Identification Number:
012728978
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| FF-S-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS51849-1 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FASTENER LENGTH | 0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | HEAD HEIGHT | 0.049 INCHES MINIMUM AND 0.060 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | INTERNAL DRIVE STYLE | SLOT | | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.112 INCHES | | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 10S STYLE | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD ALL MATERIAL RESPONSES OR 66 FED STD ALL MATERIAL RESPONSES | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OR MIL-C-81562,TYPE 2,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE | | SCREW MATERIAL | STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1030 OR STEEL COMP 1035 OR STEEL COMP 1040 | | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE | | WIDTH BETWEEN FLATS | 0.181 INCHES MINIMUM AND 0.187 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.178 INCHES MINIMUM AND 0.250 INCHES MAXIMUM | | THREAD CLASS | 2A | | THREAD QUANTITY PER INCH | 48 | | THREAD SERIES DESIGNATOR | UNF |
|
|