5305-01-274-2894, SCREW,EXTERNALLY RELIEVED BODY

5305-01-274-2893 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-274-2894

Federal Supply Class:
5305

National Item Identification Number:
012742894

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

6212-SS-0440-7	1FJ15	EMHART INDUSTRIES AMATOM ELECTRONICS HARDWARE DIV
KML83	02750	EATON AEROSPACE LLC
LL-HX5-6324	14153	DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.245 INCHES NOMINAL
COUNTERSINK ANGLE	81.0 DEGREES MINIMUM AND 83.0 DEGREES MAXIMUM
CRITICALITY CODE JUSTIFICATION	ZZZY
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.596 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.073 INCHES MINIMUM AND 0.083 INCHES MAXIMUM
HEAD DIAMETER	0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM
HEAD STYLE	OVAL COUNTERSUNK
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-W-52263 MIL SPEC ALL MATERIAL RESPONSES OR ASTM A581 ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIAL	STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 303SE OR STEEL COMP 303PB OVERALL
NOMINAL THREAD DIAMETER	0.112 INCHES
POINT STYLE	FLAT
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
SPECIAL TEST FEATURES	SPECIAL QUALITY CONTROL TESTING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-F-14072-E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
TEST DATA DOCUMENT	81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM
THREAD CLASS	2A
THREAD SERIES DESIGNATOR	UNC
THREAD QUANTITY PER INCH	40

Click here to Register for Free 30-day Trial