|
|
|
National Stock Number:
5305-01-280-1916
Federal Supply Class:
5305
National Item Identification Number:
012801916
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 121556-4-A17P | 56878 | SPS TECHNOLOGIES, LLC | | 121558-4-A17P | 80539 | SPS TECHNOLOGIES, LLC | | AIC985-4-17P | 06725 | SPS TECHNOLOGIES, LLC | | AIC987-4-17 | 06725 | SPS TECHNOLOGIES, LLC | | C7985-4-17 | 06725 | SPS TECHNOLOGIES, LLC | | C7985-4-17 | 81755 | LOCKHEED MARTIN CORPORATION | | VT1694F4-17 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | SF117-4-17 | 0K6Z0 | SATURN FASTENERS INC | | H185-4-17 | 17446 | HUCK INTERNATIONAL, INC | | PBF1166-4-17 | 27624 | SPS TECHNOLOGIES LLC | | VT1694F4-17 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | H185-4-17 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.529 INCHES NOMINAL | | GRIP DIAMETER | 0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM | | GRIP LENGTH | 1.063 INCHES NOMINAL | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.399 INCHES NOMINAL | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.403 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 28 |
|
|