5305-01-280-6740, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-280-6740

Federal Supply Class:
5305

National Item Identification Number:
012806740

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

123463E3-13	80539	SPS TECHNOLOGIES, LLC
GB510DY3E13	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
HR243E3-13	03950	NAVAL INVENTORY CONTROL POINT MECHANICSBURG
HR243E3-13	73197	HI-SHEAR CORPORATION
HR243E3-13	L4528	LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC

Techincal Specification:

COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH	1.160 INCHES MINIMUM AND 1.190 INCHES MAXIMUM
FEATURES PROVIDED	SEALING RING AND CETYL ALCOHOL LUBRICANT
GRIP DIAMETER	0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH	0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
HEAD DIAMETER	0.339 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD HEIGHT	0.439 INCHES MINIMUM AND 0.459 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL	IRON ALLOY 660 FASTENER
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
SPECIAL FEATURES	O-RING FLOURSILICONE RUBBER PER MIL-R-6855 CL 1 GR 60
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT	PASSIVATE FASTENER
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A
THREAD LENGTH	0.338 INCHES MINIMUM AND 0.388 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial