5305-01-282-7503, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-282-7503

Federal Supply Class:
5305

National Item Identification Number:
012827503

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

NAS1578A5R4	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NAS1578C5R4	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

FASTENER LENGTH	0.736 INCHES MINIMUM AND 0.766 INCHES MAXIMUM
GRIP LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
GRIP DIAMETER	0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
HEAD DIAMETER	0.597 INCHES MINIMUM AND 0.612 INCHES MAXIMUM
HEAD HEIGHT	0.176 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HEAD STYLE	PAN NO. 2
INTERNAL DRIVE STYLE	TORQUE-SET RIBBED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	IRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.312 INCHES
SPECIFICATION/STANDARD DATA	80205-NAS1578 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.476 INCHES MINIMUM AND 0.526 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	24

Click here to Register for Free 30-day Trial