5305-01-283-4618, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-283-4618

Federal Supply Class:
5305

National Item Identification Number:
012834618

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

248-SS-20

55566

MATTHEW WARREN, INC

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	1.735 INCHES MINIMUM AND 1.765 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
HEAD DIAMETER	0.750 INCHES MINIMUM AND 0.765 INCHES MAXIMUM
HEAD HEIGHT	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD STYLE	KNURLED NO. 4
INTERNAL DRIVE STYLE	SLOT
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER	0.250 INCHES
POINT STYLE	CONE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
THREAD QUANTITY PER INCH	20
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial