5305-01-283-9899, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-283-9899

Federal Supply Class:
5305

National Item Identification Number:
012839899

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

CA21017-4-14	29372	HOWMET GLOBAL FASTENING SYSTEMS INC.
FIT01-0001-4014	58998	FASTENER INNOVATION TECHNOLOGY, INC.
LE111-0001-4014	43999	THE BOEING COMPANY
LE111-0001-4014	58998	FASTENER INNOVATION TECHNOLOGY, INC.

Techincal Specification:

FASTENER LENGTH	1.401 INCHES MINIMUM AND 1.421 INCHES MAXIMUM
GRIP DIAMETER	0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH	0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HEAD DIAMETER	0.477 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
HEAD HEIGHT	0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE	PAN NO. 2
INTERNAL DRIVE STYLE	HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	IRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
SPECIAL FEATURES	THREE KEYWAYS 1.371 INCH MIN. AND 1.391 INCH MAX. LONG AND 0.040 INCH MIN. AND 0.044 INCH MAX. WIDE; HOLE AT THREADED END WITH DIA. REAMED TO ACCEPT PLUG
WIDTH ACROSS FLATS	0.1565 INCHES MINIMUM AND 0.1587 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.516 INCHES MINIMUM AND 0.556 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	28

Click here to Register for Free 30-day Trial