5305-01-284-9678, SCREW,CAP,SOCKET HEAD

National Stock Number:
5305-01-284-9678

Federal Supply Class:
5305

National Item Identification Number:
012849678

Description:
SCREW,CAP,SOCKET HEAD

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter. The head has an internal socket or multiple spline for use with an inserted driver. A locking feature may be incorporated in the design of the head or threads. Excludes items with bevel (conical) heads. See BOLT, INTERNAL WRENCHING. Excludes SCREW, SHOULDER; and SCREW, MACHINE.

Manufacturer Information:

B1821BH125F500L	05047	THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
FF-S-85	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
FF-S-85C TYPE II STYLE 10P	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
M18240 1.250-12UNF-2A 5.000LG	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-F-18240,CONF-B HEX HEAD	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-F-18240,C0N F-B HEX HEAD	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH
MS90727-281L	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

FASTENER LENGTH	4.812 INCHES MINIMUM AND 5.000 INCHES MAXIMUM
HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM FASTENER
HEAD HEIGHT	0.749 INCHES MINIMUM AND 0.813 INCHES MAXIMUM
HEAD STYLE	HEXAGON
INTERNAL DRIVE STYLE	W/O INTERNAL DRIVE
LOCKING FEATURE	PATCH OR STRIP THREADS
MATERIAL DOCUMENT AND CLASSIFICATION	SAE J429 GR 8 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL	PLASTIC POLYAMIDE (NYLON) LOCKING FEATURE
MATERIAL	STEEL FASTENER
MINIMUM TENSILE STRENGTH	150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	1.250 INCHES
NONDEFINITIVE SPEC/STD DATA	2 TYPE AND 10P STYLE AND 8 GRADE
WIDTH BETWEEN FLATS	1.812 INCHES MINIMUM AND 1.875 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT	CADMIUM AND CHROMATE FASTENER
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	2.750 INCHES MINIMUM AND 2.938 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNF
THREAD QUANTITY PER INCH	12

Click here to Register for Free 30-day Trial