|
|
|
National Stock Number:
5305-01-286-6044
Federal Supply Class:
5305
National Item Identification Number:
012866044
Description:
SCREW,CAP,SOCKET HEAD
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter. The head has an internal socket or multiple spline for use with an inserted driver. A locking feature may be incorporated in the design of the head or threads. Excludes items with bevel (conical) heads. See BOLT, INTERNAL WRENCHING. Excludes SCREW, SHOULDER; and SCREW, MACHINE.
|
Manufacturer Information:
| 717801668-001 | 04939 | LOCKHEED MARTIN CORPORATION | | CA21189-4-10HS | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | CA21294-4-10HS | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.477 INCHES MINIMUM AND | | 0.636 INCHES MAXIMUM | | FASTENER LENGTH | 1.327 INCHES MINIMUM AND | | 1.347 INCHES MAXIMUM | | MATERIAL | IRON ALLOY 660 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.360 INCHES MINIMUM AND | | 0.404 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.156 INCHES NOMINAL | | SPECIAL FEATURES | THREE KEY SLOTS LENGTH OF SCREW,120 DEGREES APART,0.040 IN. WIDE AND 0.029 IN. DEEP SPLINES; COUNTERBORE HOLE ON THREADED END 0.112 IN. DIA. TWO LEAD THREADS |
|
|