|
|
|
National Stock Number:
5305-01-286-7185
Federal Supply Class:
5305
National Item Identification Number:
012867185
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 11905-3DL11 | 59563 | REID PRODUCTS INC. | | HT4025L3D11 | 73197 | HI-SHEAR CORPORATION | | ST3M454-3DL11 | 76301 | THE BOEING COMPANY | | HT4025L3D11 | 80539 | SPS TECHNOLOGIES, LLC | | HT4025L3D11 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HT4025L3D11 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | ST3M454-3DL11 | 80539 | SPS TECHNOLOGIES, LLC | | ST3M454-3DL11 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.958 INCHES MINIMUM AND 0.998 INCHES MAXIMUM FIRST HOLE | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.079 INCHES MINIMUM AND 1.109 INCHES MAXIMUM | | GRIP LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM | | GRIP DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | HEAD DIAMETER | 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|