5305-01-286-9184, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-286-9184

Federal Supply Class:
5305

National Item Identification Number:
012869184

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

CA21017-3-22	29372	HOWMET GLOBAL FASTENING SYSTEMS INC.
LE111-0001-3022	43999	THE BOEING COMPANY
LE111-0001-3022	58998	FASTENER INNOVATION TECHNOLOGY, INC.

Techincal Specification:

FASTENER LENGTH	1.810 INCHES MINIMUM AND 1.830 INCHES MAXIMUM
GRIP DIAMETER	0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH	1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM
HEAD DIAMETER	0.360 INCHES MINIMUM AND 0.374 INCHES MAXIMUM
HEAD HEIGHT	0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD STYLE	PAN NO. 2
INTERNAL DRIVE STYLE	HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	IRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
SPECIAL FEATURES	THREE KEYWAYS MACHINED IN BODY OF SCREW 1.780 TO 1.800 LONG,0.030 TO 0.034 WIDE. BORE MACHINE IN THREADED END TO RECIEVE PLUG
WIDTH ACROSS FLATS	0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.425 INCHES MINIMUM AND 0.465 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial