| THREAD SERIES DESIGNATOR | UNJC |
| NOMINAL THREAD DIAMETER | 0.112 INCHES |
| THREAD QUANTITY PER INCH | 40 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.107 INCHES MINIMUM AND |
| 0.157 INCHES MAXIMUM |
| FASTENER LENGTH | 0.157 INCHES MINIMUM AND |
| 0.188 INCHES MAXIMUM |
| MATERIAL | PLASTIC POLYAMIDE LOCKING FEATURE |
| STEEL COMP 4140 OR |
| STEEL COMP 4340 OR |
| STEEL COMP 8740 FASTENER |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR |
| MIL-S-8844 MIL SPEC 2ND MATERIAL RESPONSE OR |
| AMS6414 ASSN STD 2ND MATERIAL RESPONSE OR |
| MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE FASTENER |
| SURFACE TREATMENT | CADMIUM AND |
| CHROMATE FASTENER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND |
| 40.0 ROCKWELL C MAXIMUM FASTENER |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| HEAD STYLE | PAN |
| HEAD DIAMETER | 0.205 INCHES MINIMUM AND |
| 0.219 INCHES MAXIMUM |
| HEAD HEIGHT | 0.070 INCHES MINIMUM AND |
| 0.080 INCHES MAXIMUM |
| INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| LOCKING FEATURE | PELLET OR |
| PATCH OR |
| STRIP THREADS |
| SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| 32.0 MICROINCHES THREADS |
| SPECIFICATION/STANDARD DATA | 80205-NAS1190 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |