5305-01-287-2908, SCREW,CAP,HEXAGON HEAD

National Stock Number:
5305-01-287-2908

Federal Supply Class:
5305

National Item Identification Number:
012872908

Description:
SCREW,CAP,HEXAGON HEAD

Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.

Manufacturer Information:

FF-S-85	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS51108-191	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	3.052 INCHES MINIMUM AND 3.260 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	3.312 INCHES MINIMUM AND 3.500 INCHES MAXIMUM
HARDNESS RATING	32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.531 INCHES MINIMUM AND 0.563 INCHES MAXIMUM
HEAD STYLE	HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	SAE GR8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
MINIMUM TENSILE STRENGTH	150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.875 INCHES
NONDEFINITIVE SPEC/STD DATA	2 TYPE AND 10 STYLE AND 8 GRADE
SHANK UNTHREADED HOLE DIAMETER	0.138 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS	1.285 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
SURFACE FINISH	63.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	D0D-P-16232 TYZ MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PHOSPHATE ZINC OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	2.000 INCHES MINIMUM AND 2.188 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNF
THREAD QUANTITY PER INCH	14

Click here to Register for Free 30-day Trial