5305-01-289-5852, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-289-5852

Federal Supply Class:
5305

National Item Identification Number:
012895852

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

ABS20519-08E20	02310	PATTONAIR USA INC
ABS20519-08E20	70127	ABSCOA INDUSTRIES INC

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM
EXTENDED WASHER DIAMETER	0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	1.235 INCHES MINIMUM AND 1.280 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD HEIGHT	0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD STYLE	ROUND EXTENDED WASHER
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL DOCUMENT AND CLASSIFICATION	AMS3652 ASSN STD SINGLE MATERIAL RESPONSE STAND-OFF
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC ALL MATERIAL RESPONSES FASTENER
MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE STAND-OFF
MATERIAL	STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 FASTENER
NOMINAL THREAD DIAMETER	0.164 INCHES
SPECIAL FEATURES	O-RING UNDER HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT	PASSIVATE FASTENER
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial