|
|
|
National Stock Number:
5305-01-290-4868
Federal Supply Class:
5305
National Item Identification Number:
012904868
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 121558-5-5 | 80539 | SPS TECHNOLOGIES, LLC | | 121558-5-A5P | 0K6Z0 | SATURN FASTENERS INC | | AIC985-5-5 | 06725 | SPS TECHNOLOGIES, LLC | | 121558-5-A5P | 56878 | SPS TECHNOLOGIES, LLC | | 121558-5-A5P | 80539 | SPS TECHNOLOGIES, LLC | | C7985-5-5 | 81755 | LOCKHEED MARTIN CORPORATION | | H185-5-5 | 17446 | HUCK INTERNATIONAL, INC | | PBF1166-5-5 | 27624 | SPS TECHNOLOGIES LLC | | VT164F5-5 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | H185-5-5 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.732 INCHES MINIMUM AND 0.752 INCHES MAXIMUM | | GRIP LENGTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM | | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.429 INCHES MINIMUM AND 0.479 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 132000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.410 INCHES MINIMUM AND 0.450 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|