|
|
|
National Stock Number:
5305-01-296-7813
Federal Supply Class:
5305
National Item Identification Number:
012967813
Description:
SCREW,CAP,HEXAGON HEAD
Detail:
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD.
|
Manufacturer Information:
| 10KP220 | 75Q65 | OSHKOSH DEFENSE LLC | | 122-5277704 ITE | 53711 | NAVAL SEA SYSTEMS COMMAND | | 8303527 | 1YHH8 | JLG INDUSTRIES, INC. | | 8303527 | 3Y949 | TRAK INTERNATIONAL | | MS90725-183 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | FF-S-85 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | NASM90725 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS90725-183 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FASTENER LENGTH | 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM | | HARDNESS RATING | 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE GR5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | MINIMUM TENSILE STRENGTH | 120000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.750 INCHES | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 10P STYLE AND 5 GRADE | | WIDTH BETWEEN FLATS | 1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2A | | THREAD LENGTH | 0.938 INCHES MINIMUM AND 1.250 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 10 |
|
|