|
|
|
National Stock Number:
5305-01-298-2442
Federal Supply Class:
5305
National Item Identification Number:
012982442
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 121557-3-A8R | 56878 | SPS TECHNOLOGIES, LLC | | 121557-3-A8R | 80539 | SPS TECHNOLOGIES, LLC | | AIC984-3-8R | 06725 | SPS TECHNOLOGIES, LLC | | HO443-8R | 17446 | HUCK INTERNATIONAL, INC | | PBF11653-8R | 27624 | SPS TECHNOLOGIES LLC | | C7984-3-8R | 81755 | LOCKHEED MARTIN CORPORATION | | VT16933-8R | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | VT16933-8R | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.808 INCHES MINIMUM AND 0.838 INCHES MAXIMUM | | GRIP LENGTH | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM | | GRIP DIAMETER | 0.2041 INCHES MINIMUM AND 0.2051 INCHES MAXIMUM | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.325 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SINGLE SHEAR STRENGTH | 132000 POUNDS PER SQUARE INCH | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.323 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|