|
|
|
National Stock Number:
5305-01-298-3191
Federal Supply Class:
5305
National Item Identification Number:
012983191
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| NAS1189E5P8 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| BEARING SURFACE OF HEAD SURFACE FINISH | 32.0 MICROINCHES | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | HEAD DIAMETER | 0.568 INCHES MINIMUM AND 0.617 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | LOCKING FEATURE MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3650 ASSN STD SINGLE MATERIAL RESPONSE | | LOCKING FEATURE MATERIAL | PLASTIC POLYCHLOROTRIFLUOROETHYLENE | | LOCKING FEATURE | STRIP OR PELLET OR PATCH | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE | | SCREW MATERIAL | IRON ALLOY 660 | | SCREW SURFACE TREATMENT | PASSIVATE | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE | | SHANK SURFACE FINISH | 32.0 MICROINCHES | | THREAD CLASS | 3A | | THREAD LENGTH | 0.229 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 | | THREAD SURFACE FINISH | 32.0 MICROINCHES |
|
|