|
|
|
National Stock Number:
5305-01-299-6585
Federal Supply Class:
5305
National Item Identification Number:
012996585
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| MS9555-14 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.362 INCHES MINIMUM AND 0.422 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.030 INCHES MINIMUM | | EXTENDED WASHER DIAMETER | 0.312 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FASTENER LENGTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | FIRST DIAMETER FROM HEAD | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM | | HEAD HEIGHT | 0.230 INCHES NOMINAL | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | INTERNAL DRIVE STYLE | W/O INTERNAL DRIVE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | POINT STYLE | FLAT | | WIDTH BETWEEN FLATS | 0.218 INCHES NOMINAL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.568 INCHES MINIMUM AND 0.648 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 36 |
|
|