5305-01-299-8391, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-299-8391

Federal Supply Class:
5305

National Item Identification Number:
012998391

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

NAS1153V7DR

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.572 INCHES MINIMUM AND 0.612 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	0.699 INCHES MINIMUM AND 0.729 INCHES MAXIMUM
GRIP DIAMETER	0.1881 INCHES MINIMUM AND 0.1887 INCHES MAXIMUM
GRIP LENGTH	0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	TORQUE-SET RIBBED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	TITANIUM ALLOY UNS R56400 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA	80205-NAS1153 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A
THREAD LENGTH	0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial