| FASTENER LENGTH | 0.218 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| HEAD DIAMETER | 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| HEAD HEIGHT | 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| HEAD STYLE | PAN |
| INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES PRIMARY WASHER |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND B FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763 COND A FED SPEC 2ND MATERIAL RESPONSE FASTENER |
| MATERIAL | STEEL COMP 302 OR STEEL COMP 304 PRIMARY WASHER |
| MATERIAL | STEEL COMP 302 OR STEEL COMP 304 FASTENER |
| MATERIAL | STEEL COMP 302 OR STEEL COMP 304 SECONDARY WASHER |
| NOMINAL THREAD DIAMETER | 0.138 INCHES |
| PRIMARY WASHER MATERIAL THICKNESS | 0.031 INCHES MINIMUM |
| PRIMARY WASHER OUTSIDE DIAMETER | 0.250 INCHES MAXIMUM |
| PRIMARY WASHER STYLE | SPLIT HELICAL RING |
| SECONDARY WASHER MATERIAL THICKNESS | 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM |
| SECONDARY WASHER OUTSIDE DIAMETER | 0.253 INCHES MINIMUM AND 0.263 INCHES MAXIMUM |
| SECONDARY WASHER RELATIONSHIP TO PRIMARY WASHER | NOT IDENTICAL |
| SECONDARY WASHER STYLE | FLAT |
| SPECIFICATION/STANDARD DATA | 80205-NAS1301 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| WASHER QUANTITY | 2 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER |
| SURFACE TREATMENT | PASSIVATE FASTENER |
| SURFACE TREATMENT | PASSIVATE PRIMARY WASHER |
| SURFACE TREATMENT | PASSIVATE SECONDARY WASHER |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.125 INCHES MINIMUM |
| THREAD CLASS | 2A |
| THREAD SERIES DESIGNATOR | UNC |
| THREAD QUANTITY PER INCH | 32 |