2990-01-304-0634 SENSOR,ENGINE COOLANT TEMPERATUR Index 5306-01-304-0636 BOLT,INTERNAL WRENCHING

National Stock Number:
5305-01-304-0635

Federal Supply Class:
5305

National Item Identification Number:
013040635

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.


Manufacturer Information:
A300479680063US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR


Techincal Specification:
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER0.165 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY1
FASTENER LENGTH0.310 INCHES NOMINAL
FIRST DIAMETER FROM HEAD0.139 INCHES MINIMUM AND 0.149 INCHES MAXIMUM
HEAD DIAMETER0.250 INCHES MINIMUM AND 0.262 INCHES MAXIMUM
HEAD HEIGHT0.072 INCHES MINIMUM AND 0.082 INCHES MAXIMUM
HEAD STYLEFLAT CHAMFER
INTERNAL DRIVE STYLESLOT
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A581 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 303SE OVERALL
NOMINAL THREAD DIAMETER0.138 INCHES
POINT STYLEFLAT
SECOND DIAMETER FROM HEAD0.098 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.145 INCHES NOMINAL
THREAD CLASS3A
THREAD SERIES DESIGNATORUNC
THREAD QUANTITY PER INCH32


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us