5305-01-304-4459 SCREW,CAP,SOCKET HEAD Index 5910-01-304-4461 CAPACITOR,FIXED,CERAMIC DIELECTR

National Stock Number:
5305-01-304-4460

Federal Supply Class:
5305

National Item Identification Number:
013044460

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.


Manufacturer Information:
NAS334CA3780205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
FASTENER LENGTH3.891 INCHES MINIMUM AND 3.938 INCHES MAXIMUM
GRIP DIAMETER0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH3.428 INCHES MINIMUM AND 3.448 INCHES MAXIMUM
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
INTERNAL DRIVE STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-8844 MIL SPEC 2ND MATERIAL RESPONSE OR AMS6414 ASSN STD 3RD MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SPECIFICATION/STANDARD DATA80205-NAS334 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH ACROSS FLATS0.157 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS3A
THREAD LENGTH0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH28


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us