5305-01-307-7047, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-307-7047

Federal Supply Class:
5305

National Item Identification Number:
013077047

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

NAS1580A3T4X

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
FASTENER LENGTH	0.598 INCHES MINIMUM AND 0.628 INCHES MAXIMUM
GRIP DIAMETER	0.2041 INCHES MINIMUM AND 0.2051 INCHES MAXIMUM
GRIP LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.339 INCHES MINIMUM AND 0.381 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE AND MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 4140 AND STEEL COMP 4340 AND STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
SPECIFICATION/STANDARD DATA	80205-NAS1580 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY2 CL2 FED SPEC 1ST TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A
THREAD LENGTH	0.338 INCHES MINIMUM AND 0.388 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial