|
|
|
National Stock Number:
5305-01-317-1322
Federal Supply Class:
5305
National Item Identification Number:
013171322
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| 03A249P3-B-5 | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | 72B409026-2013 | 76301 | THE BOEING COMPANY | | FDC7900PL-10-B-5 | 0HDW7 | HUCK INTERNATIONAL, INC. | | CS1181P-3-B-5 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | FDC7900PL-10-B-5 | 97928 | HUCK INTL INC | | FDC7900PL-10F-B -5 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | FT1301P-10-B-5 | 58794 | FASTENER TECHNOLOGY CORP |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.281 INCHES NOMINAL | | FASTENER LENGTH | 0.785 INCHES NOMINAL | | MATERIAL | STEEL COMP 304 STAND-OFF | | IRON ALLOY 660 FASTENER | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A493 ASSN STD SINGLE MATERIAL RESPONSE STAND-OFF | | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | HEAD STYLE | PAN | | HEAD DIAMETER | 0.365 INCHES NOMINAL | | HEAD HEIGHT | 0.128 INCHES NOMINAL | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MATERIAL ACCOMMODATED THICKNESS | 0.063 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM |
|
|