|
|
|
National Stock Number:
5305-01-333-4625
Federal Supply Class:
5305
National Item Identification Number:
013334625
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| MS35190-317L | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS35190-317L | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM | | HEAD DIAMETER | 0.685 INCHES MINIMUM AND 0.762 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | LOCKING FEATURE MATERIAL | PLASTIC POLYAMIDE (NYLON) | | LOCKING FEATURE | PATCH OR STRIP | | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 2 STYLE | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE | | SCREW MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 | | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2A | | THREAD LENGTH | 0.364 INCHES MINIMUM AND 0.625 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 16 |
|
|